Removing stem from movement

Does just what it says on the tin, the place to ask for advice and help, but remember this is an enthiusiast group, not an officia TIMEXl or Professional watchmaker resource, any advice you take is entirely at your own risk!
Timexguy74
Viscount
Posts: 178
Joined: Thu Dec 15, 2016 12:11 pm

Removing stem from movement

Postby Timexguy74 » Thu Feb 23, 2017 11:50 am

I have this old Timex Marlin and can't figure out how to remove the stem does anyone have a idea thanks.
Attachments
IMAG0322-600x800.jpg
IMAG0322-600x800.jpg (136.21 KiB) Viewed 345 times

Paul H.
Mercury
Posts: 97
Joined: Fri Oct 28, 2016 1:31 pm

Re: Removing stem from movement

Postby Paul H. » Thu Feb 23, 2017 12:37 pm

Pleases wait for another confirming answer but for me it has been yrs since I worked on an early 21/22? movement (with little success ) - If I remember correctly you have to carefully loosen the screw on the 2 copper bands (I think)............good luck / cheers p

Timexguy74
Viscount
Posts: 178
Joined: Thu Dec 15, 2016 12:11 pm

Re: Removing stem from movement

Postby Timexguy74 » Thu Feb 23, 2017 1:12 pm

Yes I will wait but thank you Paul for your reply the reason I need it out is so I can put a second hand on from a doner watch.

User avatar
matlobi
Viscount
Posts: 146
Joined: Tue Apr 26, 2016 9:59 pm
Location: Where the gales of November came early.
Contact:

Re: Removing stem from movement

Postby matlobi » Thu Feb 23, 2017 9:38 pm

This could be useful. Page 10 (shown as page 37 on the document).

https://drive.google.com/file/d/0B-IKHN ... sp=sharing
MattB
"Time is an illusion."

Timexguy74
Viscount
Posts: 178
Joined: Thu Dec 15, 2016 12:11 pm

Re: Removing stem from movement

Postby Timexguy74 » Thu Feb 23, 2017 10:44 pm

matlobi wrote:This could be useful. Page 10 (shown as page 37 on the document).

https://drive.google.com/file/d/0B-IKHN ... sp=sharing

That's great I'm going to give it a try thanks.

Timexguy74
Viscount
Posts: 178
Joined: Thu Dec 15, 2016 12:11 pm

Re: Removing stem from movement

Postby Timexguy74 » Fri Feb 24, 2017 12:03 am

Worked great Matt thanks for the help.

User avatar
matlobi
Viscount
Posts: 146
Joined: Tue Apr 26, 2016 9:59 pm
Location: Where the gales of November came early.
Contact:

Re: Removing stem from movement

Postby matlobi » Fri Feb 24, 2017 8:05 pm

Timexguy74 wrote:Worked great Matt thanks for the help.


You're very welcome.

Show off the finished product when you're done.
MattB
"Time is an illusion."


Return to “Technical Topics”

Who is online

Users browsing this forum: No registered users and 1 guest